The Mater Ray Lamps are a stunning new lighting series, combining oak and steel in a beautifully innovative contrast. Designed by Danish design studio PEDERJESSEN, The Ray collection has a strong aesthetic reference to Nordic minimalism and materials, yet utilizes low energy. The wooden globe shade is mounted inside the steel shell with magnets so that the user can position the beam of light in any direction.

Ray’s outer shell is constructed in steel, with wooden inner globe housing, and textile-covered cord. Ray is available as a table lamp, a wall lamp, and pendant light in black or white.

What’s Included

• Ray Small White Pendant Light

Not Included

• Bulb(s)

Features

• Use Low heat LED technology in new energy-efficient ways.
• FSC-certified wood main material
• A wooden globe shade is mounted inside the steel shell with magnets, which makes it possible to adjust the light in any direction
• Ray has got a simple and poetic silhouette that can fit into both private as well as commercial spaces
• Supporting affordable and clean energy (SDG7) and responsible consumption and production (SDG12)

Specifications

Product Care

To maintain the finish quality of your Mater product, please follow the care and cleaning procedures provided below. The instructions for the care and maintenance are provided to you as a service. No warranty is implied since results may vary.

Wood

Lacquered or stained wood

Lacquered or stained wood offers a stronger surface than oiling and is also effective when colored surfaces are desired. Compared to natural or oiled wood, lacquered and stained wood is easier to clean and requires very little maintenance.

For daily care, it is recommended to dust the furniture with a soft cloth. Lacquered and stained wood can be cleaned with a soft cloth wrung in a mild solution of lukewarm water and a universal cleaning detergent. Always follow the wood grains and always dry with a soft dry cloth immediately after cleaning.

Avoid the use of abrasive cleaning agents and aggressive cleaning detergents as this will damage the surface of the lacquered or stained wood. Avoid placing wooden furniture in direct sunlight, excessive heat, or humidity.

Mater always recommend the use of trivets under hot objects, such as coffee pots and cups to prevent the lacquer or stain to react to the heat.

Soaped wood

Soaped wood requires gentle and daily care for not to gain permanent stains. Clean with a slightly damp, soft, lint-free cloth and follow the wood grains, and always dry with a soft dry cloth immediately after cleaning.

In case of stains on soaped wood, lightly sand the surface with sandpaper grade 220 or 240. Then wipe with a dry soft cloth and follow the wood grains and apply the white soap following the wood grains.

Avoid the use of abrasive cleaning agents and aggressive cleaning detergents as this will damage the surface of the lacquered or stained wood. Avoid placing wooden furniture in direct sunlight, excessive heat, or humidity.

Aluminum

Polished aluminum

A polished aluminum surface is durable and requires very little maintenance. It is recommended only to use a soft dry cloth to clean polished aluminum surfaces or if necessary a soft cloth wrung in lukewarm water can be carefully applied.

In case of large-scale stains; mix 1 tablespoon cream of tartar with one quart of lukewarm water. Apply the mixture to the aluminum with a soft cloth. If necessary scrub gently with a steel wool pad in a back and forth motion. Avoid using a circular motion as this can cause an uneven look. Be cautious not to scrub too hard with the steel wool as this can scratch the aluminum. Finish by applying a little bee wax on the surface to obtain the shine.

Powder coated aluminum

A powder-coated aluminum surface is durable and requires very little maintenance. It is recommended only to use a soft dry cloth to clean powder-coated aluminum surfaces but in case more severe cleaning is necessary, soft cloth wrung in lukewarm water can be carefully applied. Always dry immediately after cleaning with a soft dry cloth. Avoid using abrasive cleaning agents or aggressive cleaning detergents on powder-coated surfaces as this may permanently damage the surface.

Stainless steel

Dust stainless steel products for daily care using only a soft dry cloth. Cleaning of stainless steel should be done only by using a cleaning detergent specifically for stainless steel. Cleaning agents not developed specifically for stainless steel may permanently damage the surface of the stainless steel and should never be used.

Warranty

Private Market

The Supplier represents and warrants, at the time of delivery and for a period of 24 (twen- ty-four) months thereafter (the “Warranty Period”), that (i) all Products are and will be mer- chantable and without any defects in design, construction, functionality and materials and (ii) that the performance and fitness for the purpose of the Products will be in accordance with the requirements and specifications.

B2B Market

The Supplier represents and warrants, at the time of delivery and for a period of 6 (six) months thereafter (the “Warranty Period”), that (i) all Products are and will be merchanta- ble and without any defects in design, construction, functionality and materials and (ii) that the performance and fitness for the purpose of the Products will be in accordance with the requirements and specifications.

The warranty only covers indoor usage and indented for occasional usage only. The warranty covers material-, and production defects defined as physical faults and defects from the date the product was delivered from The Supplier to the Customers designated delivery address. The original invoice must be presented as proof of the purchase.

The warranty does not cover if the products mentioned in this contract has been stored, mounted or used in a wrong way, misused, altered, maintained or treated with wrong deter- gents. The warranty does not cover normal wear and tear, cutting marks, scratches, stains or damages caused by bumps or accidents.

If claiming a defect, the customer must provide physical documentation in form of digital images or similar clearly explaining the defect and how it occurred.

Downloads

• Warranty Private & B2B
• Care Maintenance
• Product Sheet
• Catalog for Lightings
• Catalog for All Products
• Inlay - Ray Pendant Small
• Mater Lighting Collections
• Certificate

3D Files

• 3D format - 3DM
• 3D format - 3DS
• 3D format - DWG
• 3D format - DXF
• 3D format - STP